Direct Answer
OEKO-TEX® STANDARD 100 Class I is the product class used for articles intended for babies and toddlers, and it is the strictest class in that standard's product-class structure. But for a buyer, the decisive question is not the class name — it is whether a specific certificate actually covers the specific finished mattress. Verify four fields in the issuing body's official register: certificate number, certificate holder, product scope and class, and validity. Crib and nursery mattresses also differ from adult mattresses in fit, firmness expectations, flammability and documentation, so confirm the destination market's current rules and paediatric guidance before specifying. A logo on a webpage is not verification.
Key Takeaways
- "Class I" describes a product class within a standard, not a blanket property of a brand or a whole product line.
- A certificate is only meaningful when its number, holder, scope, class and validity reconcile with the article being purchased.
- Ask whether the certificate covers the finished mattress or only a component (fabric, filling, ticking). Scope mismatch is the most common gap.
- Crib safety is a regulated area: fit within the crib, surface firmness, and destination-specific flammability and labelling rules must be confirmed with current official sources, not inferred from an adult mattress guide.
- For nurseries, hotels with family rooms and institutional buyers, build a verification pack and keep it with the asset record.
- Green wording such as "chemical-free", "non-toxic" or "baby-safe" is a claim, not evidence. Convert each into a document you can check.
1. What Class I actually means — and what it does not
| Question | What can be said | Common misunderstanding |
|---|---|---|
| What is STANDARD 100? | A product-label scheme that tests textile articles for a defined list of harmful substances | That it certifies the whole mattress as "safe" in every respect |
| What is Class I? | The product class for articles intended for babies and toddlers; stricter limit values apply than in higher class numbers | That Class I is a general quality grade for all bedding |
| Does it cover structure? | No — it addresses substance-related testing of the certified article or component | That it certifies crib fit, firmness, or mechanical safety |
| Does it cover emissions in the room? | No — indoor-air/VOC claims are a separate question | That a Class I label answers off-gassing questions |
| Does one certificate cover a whole brand? | No — each certificate has a defined holder and product scope | Assuming a whole-brand claim can be checked as one certificate |
| Is it permanent? | No — certificates have validity periods and scope changes | That a certificate seen once remains current |
The practical translation: a class label is a test scope, not a safety guarantee. For the wider certification landscape — what OEKO-TEX, GOTS, CertiPUR-US and GREENGUARD each certify, and how buyers check genuineness — see the certification comparison guide. For low-emission and zero-glue claims, see the zero-glue and low-emission note; these are different questions and should not be collapsed into one label.
2. The four-field certificate check
| Field | Verification action | Typical mismatch |
|---|---|---|
| Certificate number | Look it up in the issuing body's official register | Number cannot be found, or belongs to another article |
| Certificate holder | Confirm the legal entity matches the supplier or the named manufacturer | Trading company name instead of the actual mill or workshop |
| Product scope and class | Read the article description, materials and class listed on the certificate | Certificate covers fabric only, not the finished mattress; wrong class |
| Validity | Confirm the certificate is current on the date of supply | Expired or superseded certificate reused in a later order |
| Article identity | Reconcile the certificate scope with the model, batch and specification sheet | Generic "mattress" wording with no build detail |
| Test report, if cited | Confirm the report number and the laboratory that issued it | A report number quoted in marketing material with no traceable issuer |
Order of operations for a buyer: request the number first, look it up yourself, then decide whether the claim can be repeated in a specification or a tender response. Do not copy a certificate claim from a supplier's brochure into your own documents without that check. Under the brand fact card used for this site's content, certification items are recorded as declarations pending certificate-number verification, so this guide deliberately describes how to verify, not whether any particular product holds a certificate.
3. Crib and nursery versus adult mattresses
| Dimension | Crib / nursery context | Adult context | Who gives the answer |
|---|---|---|---|
| Fit within the frame | Gaps between mattress and crib sides are a safety question | Clearance is a comfort and bedding question | Destination crib-safety rules and the crib maker's instructions |
| Surface firmness | Governed by infant-sleep guidance in the destination market | A comfort preference | Current paediatric / public-health guidance |
| Flammability | Applies, with destination-specific requirements | Applies, often under a different product category | Current official rules and the test laboratory |
| Chemical and substance claims | Scrutinised at the strictest product class | Class II–IV type scopes may apply | Certificate register and test reports |
| Labelling and traceability | Batch identification and documentation are usually expected | Retail labelling | Destination market rules |
| Cleaning and moisture | Liquid ingress and drying are central to hygiene | Care and warranty | Manufacturer's written care instructions |
| Second-hand use | Often subject to specific guidance or restrictions | A condition and hygiene question | Current local guidance |
This table is deliberately free of numbers. No firmness rating, gap limit, chemical limit or age threshold is asserted here — those are regulated, market-specific and change over time. Confirm them from the current official sources in the destination country and from a qualified clinician where infant health is involved. For general (non-infant) selection guidance, see the seniors and children mattress guide and the non-toxic material guide.
4. Verification pack for institutional buyers
- Current certificate number, holder, scope, class and validity, printed from the official register.
- Specification sheet naming fabric, fillings, layer order, dimensions and batch or work-order reference.
- Written statement of which destination-market rules the article is intended to meet.
- Test-report references with the issuing laboratory, where a report is cited.
- Care and cleaning instructions, including liquid-ingress response.
- Delivery condition records and an asset register entry for each unit in a nursery or family room.
- A named person responsible for re-checking certificate validity before repeat orders.
5. Pre-purchase checklist
- [ ] Class name defined in the specification, not used as a marketing adjective
- [ ] Certificate number obtained and looked up in the official register
- [ ] Holder entity reconciled with the supplier / manufacturer
- [ ] Product scope checked: finished mattress vs component only
- [ ] Class on the certificate matches the claim
- [ ] Validity confirmed on the date of supply
- [ ] Model, batch and specification sheet reconciled with the certificate scope
- [ ] Destination crib-safety and flammability requirements confirmed from current official sources
- [ ] Infant surface-firmness question referred to current paediatric guidance
- [ ] Care, cleaning and liquid-ingress instructions received in writing
- [ ] Asset register and re-check responsibility assigned for repeat orders
- [ ] No unverified certificate claim repeated in the buyer's own tender documents
Sources and further reading
- OEKO-TEX® — official product-class definitions, label checker and certificate-number verification in the issuing body's register.
- GOTS (Global Organic Textile Standard) — scope and chain-of-custody concepts for organic-fibre claims.
- Destination-market regulators — current crib-safety, flammability and labelling rules; consult the official source applicable to the country of use.
- Current paediatric / public-health guidance — for infant sleep-surface questions, which are outside the scope of a textile certificate.
- BONJOUR LUXE Sleep Academy — certification comparison, zero-glue and low-emission, non-toxic material and seniors/children guides linked above.
This guide explains verification, not certification status. It does not state that any product holds OEKO-TEX Class I or any other certificate, and it asserts no chemical limit, firmness rating, gap measurement or age threshold. Certification items on this site are declarations pending certificate-number verification; always check the issuing body's official register. This is not medical, safety, legal or certification advice — follow current official rules and qualified clinical guidance for infant use.
---
Need the document list before a nursery or family-room project?
BONJOUR LUXE (佰仕禄®) is a handmade natural mattress brand operated by Zhejiang BONJOUR LUXE Home Furnishing Co., Ltd., with its own workshop in Keqiao, Shaoxing. Fillings are horsehair, wool, cotton, camel hair, alpaca and silk, layered by hand and locked by hand tufting — no glue, no polyurethane foam, no memory foam and no latex — so the surface can be opened for inspection, replenishment and re-tufting. Sizes and firmness can be customised for residential, hospitality, marine and OEM/ODM projects. For any infant or nursery application, request the applicable certificate numbers, the specification sheet and the destination-market compliance documents first, and verify them in the issuing body's official register before a specification is agreed.
